DNA-PROTEIN CROSSLINKING IN NORMAL HUMAN SKIN FIBROBLASTS EXPOSED TO SOLAR ULTRAVIOLET WAVELENGTHS

Three normal human skin fibroblast cell lines were exposed to the simulated solar UV radiation produced by a fluorescent sunlamp under conditions in which the wavelength components shorter than either 295, 305 or 315 nm were excluded. The level of DNA-protein crosslinks (DPC) was then measured in those cells using the alkaline elution technique either immediately after irradiation or following a 24 h incubation. In each case, cells were exposed to fluences that induce similar levels of DPC. For cells exposed to 10 kJ m(-2) of sunlamp UV > 295 nm, the level of DPC exhibited a 2-5-fold increase following incubation. In contrast, 40-100% of the DPC were removed upon incubation of cells irradiated with either 100 kJ m(-2) of sunlamp UV > 305 nm or 150 kJ m(-2) of sunlamp UV > 315 nm. A major difference between the effects induced by these wavelength regions is that, in addition to DPC, a very high level of pyrimidine dimers is also produced by sunlamp UV > 295 nm, whereas much lower dimer yields result from treatment with either sunlamp UV > 305 nm or sunlamp UV > 315 nm. A potential role for type II DNA topoisomerase in the formation of these DPC resulting from either the change in conformational structure caused by the presence of a high level of dimers or an involvement of this enzyme in dimer excision repair is discussed.     

Total Synthesis of (+/-)-Leporin A

An efficient synthesis of (+/-)-leporin A (1) has been developed using a tandem Knoevenagel condensation-inverse electron demand intramolecular hetero Diels-Alder reaction to construct the key tricyclic intermediate 3 from pyridone 5 and dienal 6 in one pot in 35% yield. Hydroxylation (71%) of 3 and methylation (77%) of the resulting hydroxypyridone 2 completed the first total synthesis of (+/-)-leporin A (1).     

(18)O]-oxygen incorporation reveals novel pathways in spiroacetal biosynthesis by Bactrocera cacuminata and B. cucumis

The origins of the oxygen atoms in 1,7-dioxaspiro[5.5]undecane (1) and hydroxyspiroacetal (2) from Bactrocera cacuminata, and in 2,8-dimethyl-1,7-dioxaspiro[5.5]undecane (3) and hydroxyspiroacetal (4) from B. cucumis, have been investigated by incorporation studies from both [(18)O(2)]-dioxygen and [(18)O]-water. Combined GC-MS examination and high-field NMR analysis have demonstrated that all oxygen atoms in 1 and 2 from B. cacuminata are dioxygen derived, but in contrast, the spiroacetals 3 and 4 from B. cucumis incorporate one ring oxygen from water and one ring oxygen (and the hydroxyl oxygen in 4) from [(18)O(2)]-dioxygen. These results reveal not only the generality of monoxygenase mediation of spiroacetal formation in Bactrocera sp., but also an unexpected complexity in their biosynthesis. A general paradigm accommodating these and other observations is presented.     

Measurement of resistant starch by enzymatic digestion in starch and selected plant materials: collaborative study

Interlaboratory performance statistics was determined for a method developed to measure the resistant starch (RS) content of selected plant food products and a range of commercial starch samples. Food materials examined contained RS (cooked kidney beans, green banana, and corn flakes) and commercial starches, most of which naturally contain, or were processed to yield, elevated RS levels. The method evaluated was optimized to yield RS values in agreement with those reported for in vivo studies. Thirty-seven laboratories tested 8 pairs of blind duplicate starch or plant material samples with RS values between 0.6 (regular maize starch) and 64% (fresh weight basis). For matrixes excluding regular maize starch, repeatability relative standard deviation (RSDr) values ranged from 1.97 to 4.2%, and reproducibility relative standard deviation (RSDR) values ranged from 4.58 to 10.9%. The range of applicability of the test is 2-64% RS. The method is not suitable for products with <1% RS (e.g., regular maize starch; 0.6% RS). For such products, RSDr and RSDR values are unacceptably high.     

High-throughput ribozyme-based assays for detection of viral nucleic acids

Many reports have suggested that target-activated ribozymes hold potential value as detection reagents. We show that a "half"-ribozyme ligase is activated similarly by three unstructured oligoribonucleotides representing the major sequence variants of a hepatitis C virus 5'-untranslated region (5'-UTR) target and by a structured RNA corresponding to the entire 5'-UTR. Half-ribozyme ligation product was detected both in an ELISA-like assay and in an optical immunoassay through the use of hapten-carrying substrate RNAs. Both assay formats afford a limit of detection of approximately 1 x 10(6) HCV molecules (1.6 attomol, 330 fM), a sensitivity which compares favorably to that provided by standard immunoassays. These data suggest that target-activated ribozyme systems are a viable approach for the sensitive detection of viral nucleic acids using high-throughput platforms.     

PHOTOREACTIVATION OF ULTRAVIOLET IRRADIATED NON-DIVIDING POPULATIONS OF ICR 2A FROG CELLS

Abstract— Ultraviolet (UV) irradiation of non-dividing populations of ICR 2A frog cells led to their detachment from the surface of the culture dish and eventual lysis. Exposure of the cells to photoreactivating light after UV irradiation prevented cell killing and was accompanied by a loss of endonuclease sensitive sites from DNA. This photoreversal did not take place when the cells were exposed at 4°C to photoreactivating light indicating that the reversal was the result of photoenzymatic repair. As the action of photoreactivating enzyme is specific for the repair of pyrimidine dimers in DNA, these results suggest that pyrimidine dimers in DNA are the critical lesions leading to the death of non-dividing populations of UV irradiated cells.     

High-resolution detection of adulteration of maize oil using multi-component compound-specific delta13C values of major and minor components and discriminant analysis

Maize oil commands a premium price and is thus a target for adulteration with cheaper vegetable oils. Detection of this activity presents a particular challenge to the analyst because of the natural variability in the fatty acid composition of maize oils and because of their high sterol and tocopherol contents. This paper describes a method that allows detection of adulteration at concentrations of just 5% (m/m), based on the Mahalanobis distances of the principal component scores of the delta(13)C values of major and minor vegetable oil components. The method makes use of a database consisting of delta(13)C values and relative abundances of the major fatty acyl components of over 150 vegetable oils. The sterols and tocopherols of 16 maize oils and 6 potential adulterant oils were found to be depleted in (13)C by a constant amount relative to the bulk oil. Moreover, since maize oil contains particularly high levels of sterols and tocopherols, their delta(13)C values were not significantly altered when groundnut oil was added up to 20% (m/m) and it is possible to use the values for the minor components to predict the values that would be expected in a pure oil; therefore, comparison of the predicted values with those obtained experimentally allows adulteration to be detected. A refinement involved performing a discriminant analysis on the delta(13)C values of the bulk oil and the major fatty acids (16:0, 18:1 and 18:2) and using the Mahalanobis distances to determine the percentage of adulterant oil present. This approach may be refined further by including the delta(13)C values of the minor components in the discriminant analysis thereby increasing the sensitivity of the approach to concentrations at which adulteration would not be attractive economically.     

The inclusion of electrostatic hydration energies in molecular mechanics calculations

Summary The problem of including solvent effects in molecular mechanics calculations is discussed. It is argued that the neglect of charge-solvent (solvation) interactions can introduce significant errors. The finite difference Poisson-Boltzmann (FDPB) method for calculating electrostatic interactions is summarized and is used as a basis for introducing a new pairwise energy term which accounts for charge-solvent interactions. This term acts between all pairs of atoms usually considered in molecular mechanics calculations and can be easily incorporated into existing force fields. As an example, a parameterization is developed for the CHARMm force field and the results compared to the predictions of the FDPB method. An approach to the realistic incorporation of solvent screening into force fields is also outlined.     

THE 'OPSIN SHIFT' IN BACTERIORHODOPSIN: STUDIES WITH ARTIFICIAL BACTERIORHODOPSINS

Abstract— The difference (in cm⁻¹) in absorption maxima between the protonated Schiff base of retinals and the pigment derived therefrom has been defined as the opsin shift. It represents the influence of the opsin binding site on the chromophore. The analysis of the opsin shifts of a series of dihydrobacteriorhodopsins has led to the external point-charge model, which in addition to a counter anion near the Schiff base ammonium, carries another negative charge in the vicinity of the β-ionone ring. This is in striking contrast to the external point-charge model proposed earlier for the bovine visual pigment. The absorption maxima of rhodopsins formed from bromo- and phenyl retinals support the two models. A retinal carrying a photoaffinity label has yielded a nonbleachable bacteriorhodopsin.     

Binding sites of nitrogenase: kinetic and theoretical studies of cyanide binding to extracted FeMo-cofactor derivatives

The first kinetic study of a substrate (CN(-)) binding to the isolated active site (extracted FeMo-cofactor) of nitrogenase is described. The kinetics of the reactions between CN(-) and various derivatives of extracted FeMo-cofactor [FeMoco-L; where L is bound to Mo, and is NMF, Bu(t)NC, or imidazole (ImH)] have been followed using a stopped-flow, sequential-mix method in which the course of the reaction is followed indirectly, by monitoring the change in the rate of the reaction of the cofactor with PhS(-). The kinetic results, together with DFT calculations, indicate that the initial site of CN(-) binding to FeMoco-L is controlled by a combination of the electron-richness of the cluster core and lability of the Mo-L bond. Ultimately, the reactions between FeMoco-L and CN(-) involve displacement of L and binding of CN(-) to Mo. These reactions occur with a variety of rates and rate laws dependent on the nature of L. For FeMoco-NMF, the reaction with CN(-) is complete within the dead-time of the apparatus (ca. 4 ms), while with FeMoco-CNBu(t) the reaction is much slower and exhibits first order dependences on the concentrations of both FeMoco-CNBu(t) and CN(-) (k = 2.5 +/- 0.5 x 10(4) dm(3) mol(-1) s(-1)). The reaction of FeMoco-ImH with CN(-) occurs at a rate which exhibits a first order dependence on FeMoco-ImH but is independent of the concentration of CN(-) (k = 50 +/- 10 s(-1)). The results are interpreted in terms of CN(-) binding directly to the Mo site for FeMoco-NMF and FeMoco-ImH, but with FeMoco-CNBu(t) initial binding at an Fe site is followed by movement of CN(-) to Mo. Complementary DFT calculations are consistent with this interpretation, indicating that, in FeMoco-L, the Mo-L bond is stronger for L = ImH than for L = CNBu(t) and the binding of CN(-) to Mo is stronger than to any Fe atom in the cofactor.